Syn-Pro by SISIS on display at FSB

By Alistair October 6, 2021 07:40 Updated

SISIS will be exhibiting at FSB Cologne, Germany from 26-28 October where the British manufacturer will be showcasing its Syn-Pro range of market leading turf maintenance equipment for synthetic surfaces.

Visitors attending FSB 2021, the international trade fair for leisure and sports facilities in Cologne, should ensure a visit to the SISIS stand is firmly on the agenda.

Located in hall 10.1, stand: B039 A038; the SISIS team will be proudly showcasing the following products:

SISIS Osca

The SISIS Osca is a tractor mounted powered oscillating brush with a 1.9 meter working width and is equally effective when used on synthetic turf with sand or rubber infill. The two oscillating brushes stand the carpet fibres up and redistributes the infill evenly, minimising compaction on the surface and improving its performance – giving consistent playing characteristics while preventing pile damage caused by reduced infill levels.

A contributory factor to the reduction of compaction is that the Osca’s working width will use fewer passes than other more conventional drag brushes to complete a pitch. Its aggressive brushing action agitates the upper infill level of the surface from side to side as well as brushing forward, helping reduce surface compaction and encourage the fibres to stand up straight which reduces the risk of contamination, drainage problems and leaves a consistent playing surface across the whole pitch.

Furthermore, a 1.8m straight brush or a grooming rake can be added to the system which will help to enhance the final finish.

SSS1000 sweeper

The SISIS SSS1000 is a tractor mounted sweeper which can be pulled by any machine. There are no tools required for the adjustment of the brush or the angle of the draw bar and to make storage easy the draw bar lifts to an upright position. With an aluminium hopper with stainless steel mesh, any infill that is collected when using the machine is returned back down to the surface leaving it free from contamination of debris

SISIS Brush-Pro

The SISIS Brush-Pro is a ride-on brushing system comprising a pair of mid mounted oscillating units and three rear mounted brush units that that have been specifically designed for maintaining synthetic surfaces. The machine has been designed for maximum manoeuvrability and operator comfort which features an electric start, hydrostatic drive for forward/reverse and its brush combinations – oscillating for thorough periodic work and rear mounted brushes for more routine work.